• Unlock Code For Nokia C2 01 Freezer
• Unlock Code For Nokia C2 01 Free Fire
• Unlock Code For Nokia C2 01 Freeze

Secret codes for Nokia C2-01

Unlock Code For Nokia C2 01 Freezer

This code can be generated by our DCT3/DCT4 free calculator code generator. Such code is based on the 15-digit IMEI number of your Nokia phone and on the network to which it is locked. Once you give us the IMEI number and network operator, the calculator generate the unlocking code. Unlock-free.com Nokia DCT 2/3/4 free unlocking service provides free unlock codes for supported Nokia DCT mobile phones. Plz help me on my c2-01 unlock code.

*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display (operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# – Display the MAC address of the WLAN adapter. This is available
only in the newer devices that support WLAN
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# – takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair – if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# – Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* – (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# – Half Rate Codec activation.
*#4720* – Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up-arrow keys) for 3 seconds, should say pin code. Press C, then press * message should flash, press * again and 04*pin*pin*pin#
*#7328748263373738# resets security code.
Default security code is 12345
*#1471# Last call (Only Vodafone)
*#21# Allows you to check the number that “All Calls” are diverted to
*#30# Lets you see the private number
*#43# Allows you to check the “Call Waiting” status of your phone.
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to
*#67# Allows you to check the number that “On Busy Calls” are diverted to
*#67705646# Removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689#
Displays – 1.Serial Number, 2.Date Made,
3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data
12345 This is the default security code
press and hold #
Lets you switch between lines

Unlock Code For Nokia C2 01 Free Fire

You will require the following:

• A USB Cable for your Nokia phone.
  
• The correct USB Cable Drivers. Installing the 'Nokia PC Suite' software that you can obtain from the Nokia website will install the appropriate USB Cable Drivers.You can find it HERE
  
• A small software application that you can download from HERE.

Unlock Code For Nokia C2 01 Freeze

• The unlock code sent to you by us,
  

Once you have all of these, follow the directions below:

1. Switch on your phone without a sim card. You should be prompted to 'Start Phone Without SIM Card' or similar. Click 'Accept' or 'OK'. Your phone is now in offline mode.
   
2. Connect your Nokia phone to the PC using the USB Cable. Your phone will display several options, PC Suite Mode', mass storage mode etc... stay in this screen, do not select any of the options.
   
3. Start the SendCodeUsb application you downloaded earlier and click on the 'Read Phone Info' button. The application should display several lines of information. If it says 'not found' replug your phone into the usb, and then click read phone info
   
4. If the application still displays 'Not Found', your USB Cable Drivers are not correctly installed. In this case you will need to uninstall, then re-install the USB Cable Drivers. This procedure will not work unless the drivers are correctly installed. Trying an alternative USB Port may also help. DO NOT move on to the next step until you have successfully installed the USB Cable Drivers and the software can read the information from the phone.
   
5. From the drop down menu chose bb5 Counter reset and click on do Job it will reset the counter.
6. Once it is done you can follow the above instructions to insert the code.